Solar water pump
Classification:
PV Livelihood And Application Products
Key words:
RIEH PV
Consultation quotation
Product Description
Photovoltaic water pump is a device that uses solar photovoltaic effect to drive water pump work. It is mainly composed of photovoltaic panels, controllers and water pumps. The following is a description of the operation steps of the photovoltaic water pump:
1. Install photovoltaic panels: Choose a sunny place and install the photovoltaic panels near the water pump to ensure that the panels can receive enough sunlight. According to the type and specifications of the photovoltaic panel, use a bracket or a fixing frame to fix it in a suitable position.
2. Connection cable: Use a suitable cable to connect the photovoltaic panel with the controller. Ensure that the length of the cable is long enough and has sufficient insulation performance and bearing capacity. When connecting, pay attention to the correct correspondence between the positive and negative poles of the cable to avoid equipment damage caused by wrong connection.
3. Install the water pump: install the water pump in the location where water is needed, which can be near a well, a pool or other water source. Ensure that the water inlet of the pump can be smoothly connected to the water source, and the water outlet can be easily connected to the irrigation system or water supply pipe.
4. Connect the water pump to the controller: Use a suitable cable to connect the water pump to the controller. Also pay attention to the correct correspondence between the positive and negative poles of the cable, and ensure that the connection is firm and reliable.
5. Check the equipment connection: After completing the above steps, carefully check the various connection parts of the photovoltaic water pump system to ensure that the cable is well connected, the equipment is firmly fixed, and there is no obvious failure or damage.
6. Open the system: After ensuring that the equipment is connected correctly, the photovoltaic water pump system can be started. Usually, the controller will automatically detect the voltage and current of the photovoltaic panel, and automatically start the water pump when the appropriate working conditions are reached. If it does not start automatically, you can manually start the pump according to the instructions of the controller.
7. Monitoring system operation: During the operation of the photovoltaic water pump system, the operating status and working effect of the equipment are regularly checked. Observe whether the output voltage and current of the photovoltaic panel are stable, whether the water pump is operating normally, and ensure the normal operation of the water supply system.
8. Maintenance: Regular maintenance of the photovoltaic water pump system, including cleaning of photovoltaic panels, inspection of cable connections, replacement of worn parts, etc. This can ensure the long-term stable operation of the system and extend the service life.
Previous Page
Next Page
Previous Page
Next Page
Recommended Products
Immediate Consultation
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Headquarters address: No. 066, Jinshui West Road, Ningxiang High-tech Industrial Park, Changsha City, Hunan Province
Copyright: Hunan Nuocheng Photovoltaic Technology Co., Ltd.
This Site Supports Ipv4 Ipv6.
Powered By: www.300.cn ChangSha